0
  • Your shopping cart is empty!

0
0

Publications

The following publications have been authored or co-authored by Mahmoud Shahriari, CEO and Founder of Fluorometrics Instruments.

  1. “Performance evaluation of fiber optical oxygen sensor in bio-reactor with live bacterial culture” Roha Afzal, Pritha Nanda, Newton King, Tunan Peng, Anna Pyayt, and Mahmoud Shahriari, University of South Florida, Chemical and Biomedical Engineering,  poster presentation, April 2013
  2. “Effect of salinity and ionic strength on sol gel based fiber optic pH sensors” M.R. Shahriari, Harrish Dabhi, Derek Guenther, In preparation for J. Sol-gel Science and Technology
  3. “Smart Oxygen Cuvette for optical monitoring of Dissolved oxygen in biological blood samples”, Harish Dabhi, Suresh Kumar Alla, Mahmoud R. Shahriari,  Proc. of SPIE Vol. 7576  75761B-1 (2010)
  4. “Smart pH Cuvette for optical monitoring of pH of biological samples” Derek A. Guenther, Mahmoud R. Shahriari, Proc. of SPIE Vol. 7576  75761A-1 (2010)
  5.  “Nanoporous thin film platform for biophotonic sensors” Suresh Alla, Rina Solanki, Yvette D. Mattley, Harish Dabhi, Mahmoud R. Shahriari, Proc. SPIE, Vol. 7173, 717304 (2009)
  6.   “Applying Fiber – Optic Sensors for Monitoring Dissolved Oxygen,” W. Wang, C.E. Reimers, M.R. Shahriari and M. J. Morris, Sea technology, March 1999
  7. “A Fiber Optic Sensor for Monitoring the Variability of Dissolved Oxygen in the Coastal Zone,” W. Wang, C.E. Reimers, M.R. Shahriari and S.C. Wainright, The Marine Technology Society Annual Conference Proceedings, Vol. 1 ( 1998)
  8.  A Sol-Gel Based Fiber Optic Sensor for Monitoring Dissolved Oxygen in Marine Environments,” C.E. Reimers, M.R. Shahriari, S.C. Wainright, W. Wang, Marc’h Mor workshop, IUEM Brest, France, 17-19 November 97, Proceedings
  9.  “A Spectroscopic Study of the Effect of Various Solvents and Sol-Gel Hosts on the Chemical and Photochemical Properties of Thionin and Nile Blue Red A,” M. Krihak , M. T. Murtagh, and M.R. Shahriari, J. Sol-gel Science and Technology, Vol. 10-2, 153-163( 1997)
  10.  “ Ormosil Thin Films for Chemical Sensing Platforms,” M.R. Shahriari, M.T. murtagh, H.C. Kwon, Chemical, Biochemical and Environmental Fiber Sensors IX, Proc. SPIE Vol. 3105, pp 40-51 (1997)
  11.  Fiber Optic Oxygen Sensors Based on the Sol-gel Coating Technique,” M. Krihak, M. Murtagh and M.R. Shahriari, Chemical, Biochemical and Environmental Fiber Sensors VIII, Proc. SPIE  Vol. 2836, pp 87-98 (1996).
  12.  “Luminescence Decay Analysis of Doped Sol-gel Films,” M. Murtagh, M. Krihak, H.C. Kwon and M.R. Shahriari, Chemical, Biochemical and Environmental Fiber Sensors VIII, Proc. SPIE  Vol. 2836, (1996).
  13.  “Development of a Highly Sensitive Fiber Optic O2/DO  Sensor  Based on a Phase Modulation Technique,” M.T. Murtagh, D.E. Ackley, and M.R. Shahriari, Electronics Letters, Vol. 32, No. 5  (1996) 477
  14.  A Highly Sensitive, All Solid State Fiber Optic Oxygen Sensor Based on the Sol-gel Coating Technique,” M. Krihaks and M.R. Shahriari, Electronics Letters, Vol. 32 Number 3 (1996) 240.
  15.  The Effect of MTMS on the Optical Properties of TEOS Synthesized Gels Doped with Thionin,î ,” M. Krihaks and M.R. Shahriari,  J. Optical Materials,  5, 301-310 (1996)
  16.  Fiber Optic Chemical/Environmental Sensors based on Active Coatingsî M. Krihaks and M.R. Shahriari, Chemical, Biochemical and Environmental Fiber Sensors VII, Proc. SPIE  Vol. 2508, pp 358-367 (1995).
  17.  “New Highly Stabilized AlF3-Based Glasses,”  T. Iqbals, M.R. Shahriari, G. Weitzs, G.H. Sigel Jr.,  J. Non-crystaline Solids,  Vol. 184 (1995) 190-193
  18.  “Active Sol-gel Materials for Fiber Optic Chemical Sensors,” M. Krihaks and M.R. Shahriari, Imaging and Instrumentation, Chemical, Biochemical and Environmental Fiber Optic Sensors, Proc. SPIE, Vol. 2293, pp 88-93 (1994).
  19.  “Fiber Optic Chemical Sensors for Process Control” M.R. Shahriari, , Proceeding of the Conference on Computer integrated Manufacturing in the Process Industries, Rutgers University,   338-350,  April 1994.
  20.  “Active Silica Gel Films for Hydrogen Sulfide Optical Sensor Application,” M.R. Shahriari and J. Dings,  Optics Letters, Vol. 19, No. 14 (1994 ).
  21.  “Optical Properties of AlF3-based Glasses Doped with Pr3+, Yb3+ and Lu3+,” T.  qbals, M.R. Shahriari, P. Hajcaks  G.H. Sigel, Jr., L.R. Copeland and W.A. Reed, Applied Optics, Vol. 33, No. 6, 965-968 (1994)
  22.  “Sol-gel Coating -based Fiber Optic O2/DO sensor,” M.R. Shahriari, J.Y. Dings, J.Tongs, G.H. Sigel, International Symposium on Optical Tools for manufacturing and Advanced Automation, Chemical, Biomedical, and Environmental Fiber Sensors, Proc. SPIE,  V0l. 2068 (1993).
  23.  “The Effect of Rare Earth Ions on the Thermal Stability of AlF3-Based Glasses,” M.R. Shahriari, T.  Iqbals, P. Hajcaks  and  G.H. Sigel, Jr., J. Non-crystaline Solids,  161, 77-80 (1993)
  24.  “Ruggedized Fiber Optic Environmental Sensors Based on Porous Optical Materials,” M.R. Shahriari, J. Lius, G. H. Sigel, Jr., M. Livas, Symposium Proceedings of Field Screening Methods for Hazardous Waste Site Investigations, 3rd International Symposium, Las Vegas, NV, February( 1993).
  25.  “Development of Porous Polymer pH Optrode,” J.N. Lius, M.R. Shahriari, and G.H. Sigel, Jr., Optics Letters, Vol. 17, No. 24, 1815-1817(1992)
  26.  “Synthesis f Dye-Impregnated Sol-Gel Glasses for Fiber Optic Chemical Sensing,” J. Dings, J. Tongs, M.R. Shahriari, and G.H. Sigel, Jr., SPIE Proceeding Vol. 1761, Properties and Characterizations of Optical Glasses (1992)
  27.  “Preliminary Study of Fiber Drawing of AlF3-based Glasses,” T. Iqbals, M.R. Shahriari, P. Foys and G.H. Sigel, Jr., Materials Science and Engineering, B12, 299-303, 1992
  28.  “Environmental Effects on the Mechanical Properties of Aluminum Fluoride Glass Optical Fibers,” J. Colaizzi, M.J. Matthewson, M.R. Shahriari, T. Iqbal, Ceramic Transactions, Vol. 28, solid state optical materials (1992), pp.579-586
  29.  “Luminescent Properties of Rare-Earth Doped Aluminum Fluoride Based Glasses,”  M.R. Shahriari, T. Iqbals, P.A. Hajcaks, G.H. Sigel, Jr., and R. Copeland and W.A. Reed, AT&T Bell Labs., Materials Research Society (MRS) Proceeding, Optical Waveguide Symposium, Vol. 244, 203-208, 1992
  30.  “Sol-Gel and RF Sputtering Thin Film Coatings for Fiber Optic Sensor Applications,”  M.R. Shahriari, J.Y. Dings, C.M. Wangs, C.H. Lins and G.H. Sigel, Jr., Materials Research Society (MRS) Proceeding, Optical Waveguide Symposium, Vol. 244, 287-292, 1992
  31.  “Porous Fiber OPtical Sensors for pH Measurement,” J.Y. Ding, M.R. Shahriari, and G.H. Sigel, Jr., Optical Fiber Sensor (OFS) conference proceeding, 8th OFS conf., IEEE catalog # 92CH3107-0, pp. 321-324, Jan. 1992.
  32.  “Effect of Processing on the Optical Scattering of AlF3-Based Glasses,” T.Iqbal, M.R. Shahriari, G.H. Sigel, Jr., A.E. Neeves, W.A. Reed, AT&T Bell Labs., Journal of Materials Research, Vol.7, No.1, 1-5, 1992
  33.  “Remote Infrared Chemical Sensing Using Highly Durable AlF3-Based Glass Fibers,”  T. Iqbals, M.R. Shahriari and G.H. Sigel, Jr., Optics Letters, Vol. 16, No. 20, 1-3, 1991.
  34.  “Mechanical Properties of Aluminum Fluoride Glass Fibers,” J. Colaizzi, M. J. Matthewson, T. Iqbal and M.R. Shahriari, SPIE Proceeding, Infrared Fiber OpticsIII, Vol. 1591 (1991).
  35.  “Fiber Optic pH Sensors Prepared by a Sol-Gel Immobilization Technique,” J. Dings, M.R. Shahriari, and G.H. Sigel, Jr., Electronics Letters, Vol. 27, No. 17, 1560-1562, 1991.
  36.  “Aluminum Fluoride Based Fibers with Enhanced Optical Transmission,”  T. Iqbals, M.R. Shahriari, P. Foys, R. Ulbrichs, G.H. Sigel, Jr., Electronics Letters, Vol. 27, No.2, 110-111, 1991.
  37.  “Development of High Temperature Humidity Sensors Based on Porous Optical Fibers,”  J. Y. Dings, M.R. Shahriari, and G.H. Sigel, Jr., International Journal of Optoelectronics, Vol.5. No. 4. 385-393, 1991
  38.  “Synthesis, Characterization and Potential Application of Highly Chemically Durable Glasses Based on AlF3,” T. Iqbals, M.R. Shahriari, G. Merbergs and G.H. Sigel, Jr., Journal of Materials Research, Vol.6, No. 2, 401-406, Feb. 1991
  39.  “Chemical Sensors for Hazardous Waste Monitoring,” M.B.Tabaccos, K. Rosenblums, Q. Zhous, and M.R. Shahriari, Symposium Proceedings of Field Screening Methods for Hazardous Waste Site Investigations, 2nd International Symposium, Las Vegas, NV, February 1991.
  40.  “Fiber Optic Moisture Sensors for High Temperatures,” J. Dings, M.R. Shahriari and G.H. Sigel, Jr., Amer. Ceram. Soc. Bull., Vol.70, No.9,  1513-1517,  1991.
  41.  “Evaluation of Crystalline and Chemically Durable Glass Fibers for Er:YAG Laser Delivery Systems,” G.N. Merberg, M.R. Shahriari, J.A. Harrington and G.H. Sigel, Jr., SPIE Proceedings, Infrared Fiber Optics II, Vol. 1228, (1990)
  42.  “Spectroscopy of Some IR Waveguides for Sensor and Laser Applications,” S.J. Saggeses, T. Iqbals, M.R. Shahriari, J.A. Harrington and G.H. Sigel, Jr., SPIE Proceedings, Infrared Fiber Optics II, Vol. 1228, (1990)
  43.  “Effect of SiO2 on Transition Temperature of Bi-(Pb)-Sr-Ca-Cu-O Superconducting Ceramics,” J.S. Wangs, A. Safari, M.R. Shahriari and G.H. Sigel, Jr., Ceramic Transaction, Superconductivity & Ceramic Superconductors, Vol. 13, 439-443, 1990.
  44.  “Fabrication of AlF3-Based Glass Fibers,” M.R. Shahriari, T. Iqbals, P.R. Foys, S.J. Saggeses and G.H. Sigel, Jr., MRS Proceedings, Optical Fiber Materials and Processing, Vol. 172,  163-168 (1990).
  45.  “A New Glass Forming Ability Criterion for Multicomponent Halide Glasses,” T. Iqbals, M.R. Shahriari and G.H. Sigel, Jr., Materials Science Forum, Vols. 67-68,  225-231, 1991.
  46.  “The Effect of Atmosphere on the Surface Crystallization of AlF3-Based Glasses During Fiber Drawing,” M.R. Shahriari, T. Iqbals and G.H. Sigel, Jr., Materials Science Forum, Vols. 67-68,  263-270, 1991.
  47.  “Development of a New Glass for Fluoride Fiber Overclad,” G. Orcel and D. Biswas from SpecTran Corporation, M.R. Shahriari, T. Iqbal and G.H. Sigel, Jr., from Rutgers University, Materials Science Forum, Vols. 67-68,  569-574, 1991.
  48.  “Evaluation of an FTIR/Fluoride Optical Fibers for Remote Sensing of Combustion Products,” S.J. Saggeses, M.R. Shahriari and G.H. Sigel, Jr., SPIE Proceedings, Chemical, Biomedical, and Environmental Sensors, Vol. 1172, 2-12,  1990
  49.  “Evaluation of Heavy Metal Fluoride Glasses for Er:YAG Lasers,” G. Merbergs, M.R. Shahriari and G.H. Sigel, Jr., SPIE Proceedings, Infrared Fiber Optics, Vol. 1048, 57-63, (1989).
  50.  “Porous Fiber Optic Sensor for Monitoring Underground Water Contaminants,” M.R. Shahriari, Q. Zhous, G.H. Sigel, Jr. and G. Stokess, Symposium Proceedings of Field Screening Methods for Hazardous Waste Site Investigations, First International Symposium, Las Vegas, NV, 43-49, October 1988
  51.  “Synthesis and Characterization of Aluminum Fluoride-Based Glasses and Fibers,” M.R. Shahriari, T. Iqbals and G.H. Sigel, Jr., Materials Science Forum, Vols. 32-33, 99-106, (1988).
  52.  “Porous Fiber Optic Sensor for High Sensitivity Humidity Measurements,” Q. Zhous, M.R. Shahriari, D. Kritzs and G.H. Sigel, Jr., Analytical Chemistry, Vol. 60, No. 20,  2317-2320, 1988 .
  53. “The Effect of Temperature on the Response of a Porous Fiber Optic Humidity Sensor,” Q. Zhous, M.R. Shahriari and G.H. Sigel, Jr., SPIE Proceedings, Chemical and Biochemical Applications of Optical Fibers, Vol. 990, 153-157, (1988).
  54.  “Optical Properties of Aluminum Fluoride Based Glasses,” T. Iqbals, M.R. Shahriari, G. Merberg, and G.H. Sigel, Jr., SPIE Proceedings, Optical Materials, Vol. 968, 34-39, (1988).
  55.  “Fabrication of Heavy Metal Fluoride Glasses Containing Ultra- Low levels of Oxygen and Water,” P. Foys, J. Anianos, N. Devoes, M.R. Shahriari, G.H. Sigel, Jr. and S. Venzke, SPIE Proceedings, Infrared Optical Materials, VI, Vol. 929, 100-105, ( 1988)
  56.  “Raman Investigation of Zirconium Fluoride Based Glasses,” G.E. Walrafen, M.S. Hokmabadi, W.H. Yang, M.R. Shahriari, R. Pafchek and G.H. Sigel, Jr., SPIE Proceedings, Infrared Optical Materials VI, Vol. 929, 133-148, ( 1988)
  57.  “Porous Optical Fibers for High Sensitivity Ammonia Vapor Sensors,”   M.R. Shahriari, Q. Zhous and G.H. Sigel, Jr., Optics Letters, Vol. 13, No. 5, 407-409,  (1988).
  58.  “Porous Fiber Optic for High Sensitivity Humidity Sensor,”  M.R. Shahriari, G.H. Sigel, Jr. and Q. Zhous,  OFS Technical Digest Series, Vol. 2, Part 2, 373-381, (1988).
  59.  “Fluoride Fibers for Remote Chemical Sensing,”  S. Saggeses, M.R. Shahriari and G.H. Sigel, Jr., SPIE Proceedings, Infrared Optical Materials VI,  Vol. 929,  106-114,  ( 1988).10.
  60. “Porous Glass Fibers for High Sensitivity Chemical and Biomedical Sensors,” M.R. Shahriari, G.H. Sigel, Jr., Q. Zhous, SPIE Proceedings, Fiber Optic and Laser Sensors V, Vol. 838, 348-352, (1987).
  61.  “Thermal Analysis of Melting and Freezing of Jet and Diesel Fuels,” C.T. Moynihan, M.R. Shahriari and T. Bardaki, Thermochimica Acta, Vol. 52, 131-141 (1982 ).

There are no products to list in this category.